1,150 Sq. Ft. Staple-Up Package
Everything you need to Provide Radiant Heat from your Wood Subfloor.*
(Not including heat source.)
Great For:
New Construction
Existing Homes
Wood Floors
Tile Floors
1 - SRP-2 Panel, with Thermostat, Thermostat Wire, Taco 011Z Pump, Mixing Valve, Pex Connections, Everything Mounted on a Powder Coated Back plate. Panel comes Pre. Assembled.
1 - SRM-8 Manifold Panel, All Loop Tees Have Valves at the Connections. Comes with Pex Fittings For Easy Connections. Main Valves are 1” Full Port Valves. Everything is mounted on a Powder Coated Back Plate. Panel Comes Pre Assembled.
8 - Rolls of ½” Pex pipe. Each Roll is 250’ Long.
1 - 2 Branch Tee Assembly with Valves. This is to make the connection to the main hot water loop.
1 - Pressure Test kit. For testing the lines before the concrete is installed.
1 - Fill and Purge Kit. This allows the installer to fill and purge the air out of the system. Kit Items: 1 – 5 Gallon Bucket to catch the water. 1 – Purge Hose to route the water into the bucket and a double Female Hose Adapter so the installer may use a standard water hose to fill the system.
1 - Tubing Cutter For The ½” Pex Pipe.
6 - 1” Pex 90 Deg Barb Ells
50 Ft. Of 1” Pex Pipe. This is to run from the Radiant Panel To the Heat Source Loop.
24 - Pex Crimp Rings 1”
18 - Pex Crimp Rings ½”
1 - Combo Crimp Tool ½” to ¾”
1 - Combo crimp Tool 3/8” to 1”
420 - Heat Transfer Plates
This materials list is subject to change and is given for reference only.
NOTE: NOT included items
Taxes, Shipping, Insulation and Installation.
This Heat Exchanger Kit can be added to any new or existing hot water heating system that requires a separation from the Simple Radiant system. This kit is designed primarily for applications where the Simple Radiant system is connected to a domestic hot water system that supplies both heating and potable (drinking) water. The Heat Exchanger Kit comes standard with a pressure gauge, temperature and pressure relief valve, automatic air purging valve, expansion tank, 175,000 btu/hr stainless steel brazed plate heat exchanger, with brass and copper fittings, PEX adapters and a bronze circulating pump (suitable for potable water applications). We assemble it, mount it to a powder coated steel back-plate and completely test it prior to shipment. All you do is hang it on the wall, connect your piping and plug the pump into a 110VAC outlet.
Retail Price: $1,298.00
SIMPLE RADIANT
By Timber Ridge, Inc.
2020 Highway 11-E
Jonesborough, TN 37659
Toll Free: 1-866-225-8015
Phone: 423-913-0585
© Copyright 2005 - 2006 | All Rights Reserved Timber Ridge, Inc.
